Ultrasonic Flaw Detector NOVOTEST UD2301

Price:	1990.0 USD
Payment Terms:	T/T,Money Gram
Place of Origin:	Ukraine


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Air

Brand Name: NOVOTEST

Ultrasonic Flaw Detector NOVOTEST UD2301

Ultrasonic flaw detector UD2301 is designed for nondestructive testing of metals, plastics, glass, composite materials, weld inspection and measurement thickness of the various products and structures.
Flaw detector allows user to detect various defects such as discontinuities, cracks and heterogeneity of materials in semi-finished products and welded joints, to measure the depth and coordinates of defects, the thickness of products, the speed of propagation and attenuation of ultrasonic vibrations (UT) in the material.
Ultrasonic Flaw detector is produced in small housing with optimal size for performing testing in tight spaces. Device has color display with high resolution 320*480 pixels, which significantly improves the usability of the device.

Advantages:

Display of the device can be operated in any orientation – there are 4 options of display rotation, that allows user to customize the unit by himself, both for lefties and righties users. Instrument could be operated in both portrait and landscape orientations.
Appointment of the ultrasonic flaw detector:

to test the quality of welds and base metal of products;
to detect corrosion, cracks, delaminations and other internal defects;
to determine coordinates and parameter estimation of defects such as discontinuity, cracks and uniformity of material in products from metal, plastic, composites and other materials;
to measure the thickness of products.

Flaw detector is equipped with 3 standard type AA rechargeable batteries. The device can also operate from simple batteries the same type. Using the batteries of standard type allows autonomous operation of the device in almost any conditions – if not the ability to charge batteries, it is possible to have spare batteries, or buy new batteries at any store.
Flaw detector allows user to solve a wide range of tasks – from the thickness measurement of thin products to large-sized casting flaw detection.
Sealed housing with rubber protective strips – Ultrasonic flaw detector UD2301 is ideal for using in workshop and field conditions with high humidity, dust, etc. Device has frost-resistant display that allows user to use the device at any season and in any climatic zone of the Earth.

Specifications:

Operating frequency range	from 1 to 10,0 MHz
Range of measured time intervals (duration of scanning)	from 6 to 1000 µs
Velocity range	1000 – 9999 m / s
Error of measurement of time intervals	not exceed ± 0,025 µs
Maximum permissible error of measurement of the amplitudes of the signals at the receiver input in the range from 0 to 110 dB	not exceed ± 0,5 dB
Testing gain range	125 dB
Averaging over the quantity of starts	from 1 to 16
Range of variation of temporal sensitivity adjustment (TVG)	40 dB
Number of control points TVG	15
Duration of the excitation pulse to the load	from 0,0 to 0,5 µs
Amplitude of the excitation pulse to the 50 Ohm load, not less	100, 200, 300
Operating frequency range of the receiver on the level -3 dB	from 1 to 10 MHz
Deviation of the amplitudes of input signals in the range from 10 to 100% of the screen height not more than	1 dB
Scanning	from 1 to 1000 µs
Delay of scanning	from 0 to 2000 µs
Range of measurement of time intervals	from 0 to 1000 µs
Setting a delay in the prism of the probe	from 0 to 15 µs
Automatic signaling of defects (AFS)	dual-gate
Setting range of AFS gates	from 0 to 2000 µs
Adjusting thresholds of AFS gates	from 0 to 100 % of screen height
Detection of signals	positive half-wave, radio mode
Dimensions (WHL)	8016238 mm
Weight, not more	250 g (without batteries)
Mean time between failures	not less than – 3000 hours